Galvalume Steel Coil Supplier
Bao Steel (Qingdao) Co., Ltd. supplies galvalume steel coil, also called aluzinc steel coil or AZ coated steel coil, for roofing sheet production, wall cladding, roll forming, building panels and outdoor construction materials. Reference supply range includes thickness 0.12–2.0mm, regular width 600–1250mm, AZ coating AZ30–AZ150, coil ID 508mm / 610mm and coil weight around 3–8 tons, subject to grade, coating and order requirements.
Choose the Galvalume Steel Coil Type You Need
Galvalume steel coil quotation should start from standard, base grade, AZ coating, thickness, width, hardness, surface treatment and downstream use. You can choose from AZ coated coil, AZ150 coil, anti-fingerprint coil, full hard coil, roofing coil or slit galvalume coil, then confirm coil ID, coil weight, packing method and destination.
AZ Coated Steel Coil
AZ coated steel coil is aluminum-zinc coated steel coil used for roofing, cladding, roll forming, building panels and outdoor steel materials.
- AZ30, AZ50, AZ100 and AZ150 can be discussed by order
- Coating requirement should match application and market standard
- Base material, hardness, thickness and width should be confirmed
AZ150 Galvalume Steel Coil
AZ150 galvalume coil is commonly requested for roofing sheet production, wall cladding, building envelope systems and outdoor construction materials.
- Reference thickness range: 0.12–2.0mm
- Regular width range: 600–1250mm
- Coil ID 508mm / 610mm should match buyer-side equipment
Anti-Fingerprint Galvalume Coil
Anti-fingerprint galvalume coil is selected when buyers need cleaner surface handling, better appearance and reduced visible fingerprints during processing.
- Suitable for visible panels, roofing material and appliance-related uses
- Surface photos or sample confirmation can be discussed when required
- Protective packing and handling should be aligned before shipment
Full Hard Galvalume Coil
Full hard galvalume coil is used when higher hardness or specific forming conditions are required for roofing profiles, panels or downstream processing.
- Hardness and yield strength should follow the buyer’s application
- Roll forming feasibility should be checked before order confirmation
- Thickness, width and AZ coating need clear RFQ details
Galvalume Coil for Roofing Sheet
Galvalume steel coil is widely used as base material for corrugated roofing sheet, trapezoidal roofing sheet, wall panels and roll forming.
- Used by roofing sheet factories and building material distributors
- Can support downstream corrugating, profiling or roll forming
- Coil packing and loading orientation should match buyer equipment
Slit Galvalume Steel Coil
Slit galvalume coil is suitable for buyers who need narrow-width strips, roofing accessories, profile production or processing-ready coil.
- Reference slit width can be discussed from 40mm to 1250mm
- Used for profiles, accessories and building material processing
- Labels, packing and loading photos can be arranged when required
Galvalume Coil Stock, Aluzinc Surface, Slitting, Roll Forming, Inspection and Export Packing
You can review galvalume coil stock, aluminum-zinc surface condition, slitting preparation, roll forming use, coating-related inspection and export packing before placing an order. These scenes help confirm whether the coil supply route matches your roofing, cladding, resale or project delivery requirements.
Galvalume Coil Warehouse Stock
Show galvalume coil stock, visible coil labels, indoor storage, lifting area or export-ready AZ coated coil inventory.
Aluzinc Surface Close-Up
Show silver-gray galvalume surface, aluminum-zinc coating texture, anti-fingerprint surface or clean coil surface detail.
Galvalume Coil Slitting Line
Show slitting equipment, narrow galvalume strip output, coil rewinding or processing-ready strip coils.
Roofing Sheet Roll Forming
Show galvalume coil being processed into corrugated, trapezoidal or profiled roofing sheets.
Coating, Size and Document Check
Show thickness check, width check, coating-related inspection, surface review, coil label checking or MTC review.
Export Coil Packing
Show waterproof wrapping, edge protection, steel straps, coil labels, shipping marks and loading preparation.
Galvalume Steel Coil Supply Range and Quotation Details
Galvalume coil quotation should clearly confirm AZ coating, base steel, thickness, width, coil ID, coil weight, surface treatment, hardness and packing method. These details directly affect roll forming, roofing sheet production and export handling.
Reference Supply Range
- Thickness0.12–2.0mm reference range, subject to base material, coating and order requirements
- Regular Width600–1250mm commonly used for roofing and roll forming applications
- Slit Width40–1250mm can be discussed for strip and profile production needs
- AZ CoatingAZ30–AZ150 reference range; AZ150 is commonly requested for roofing and cladding
- Coil ID508mm / 610mm available according to buyer’s decoiler or roll forming equipment
- Coil Weight3–8 tons per coil can be discussed depending on thickness, width and loading method
Quotation Details Buyers Should Provide
- Standard / GradeASTM A792, JIS G3321, EN 10346, SGLCC, DX51D+AZ, S350GD or S550GD
- Base MaterialCommercial quality, structural quality, full hard, soft quality or buyer-specified base steel
- SizeThickness, width, coil ID, coil weight and tolerance requirement
- SurfacePassivated, oiled, dry, chromated, anti-fingerprint or buyer-specified surface
- ApplicationRoofing sheet, wall cladding, roll forming, panel production, distribution or project use
- DestinationDestination country or port, trade term, packing requirement and shipment schedule
Galvalume Coil Supply Routes We Commonly Handle
Different buyers need different galvalume coil routes according to coating, hardness, surface treatment, processing method and final application. You can confirm whether you need commercial quality coil, full hard coil, anti-fingerprint coil, slit coil or roofing base material before quotation.
Commercial Quality Coil
Used for regular roofing, cladding, panels and general building material production where forming is required.
Structural Quality Coil
Used when strength requirement, project specification or forming performance needs clearer grade confirmation.
Processing-Ready Coil
Slitting, roll forming, profiling and roofing sheet production feasibility can be reviewed before quotation.
Export Coil Supply
Support packing, labels, MTC, shipping marks, loading photos and export shipment documentation.
Aluminum-Zinc Coating for Roofing and Outdoor Applications
Galvalume steel coil usually uses aluminum-zinc alloy coating. The coating requirement should be selected according to application environment, forming method, market standard and expected service condition.
55% Aluminum
Aluminum content helps improve surface protection and heat reflectivity for roofing and outdoor sheet applications.
43.5% Zinc
Zinc component supports sacrificial protection behavior and improves coating performance around exposed steel areas.
1.5% Silicon
Silicon helps the aluminum-zinc coating bond with the steel substrate during the coating process.
AZ Coating Choice
AZ30, AZ50, AZ100 and AZ150 can be discussed according to project specification and destination market requirement.
Key Galvalume Coil Details Buyers Should Not Ignore
Galvalume coil buyers should confirm not only thickness and width, but also AZ coating, coil ID, hardness, surface treatment and packing method. These details affect forming, appearance, unloading and downstream production.
Surface Treatment
Passivation, oiling, dry surface, chromated surface or anti-fingerprint treatment should be confirmed before quotation.
Coil ID 508 / 610mm
Coil ID should match the buyer’s decoiler, slitting line, roll forming line or roofing sheet production line.
Hardness Requirement
Commercial quality, structural quality, full hard or soft quality should be selected according to forming and final use.
Coil Packing
Waterproof wrapping, edge protection, steel straps, coil labels, shipping marks and loading photos can be arranged.
Common Applications of Galvalume Steel Coil
Galvalume steel coil is commonly selected for roofing, cladding, roll forming and building material applications where aluminum-zinc coating and forming performance are important.
Roofing Sheet Production
For corrugated roofing sheet, trapezoidal roofing sheet, roof panels and building envelope systems.
Wall Cladding
For exterior wall panels, cladding systems, industrial buildings, workshops and warehouses.
Roll Forming Lines
For downstream roll forming factories producing roofing profiles, panels and building accessories.
Building Material Distribution
For importers, building material distributors, construction suppliers and project procurement teams.
AZ Coating Check, Slitting, MTC and Export Packing Support
Galvalume coil orders require clear confirmation of coating, surface, coil ID, hardness, coil weight, packing method and shipment documents before final order.
Coating Requirement Check
Review AZ coating, base material, hardness, surface treatment and application before quotation.
Slitting Support
Slit width, tolerance, burr requirement, coil weight and strip packing can be discussed according to order.
Quality Documents
MTC, heat number, packing list, commercial invoice, certificate of origin and inspection support available.
Export Packing
Coil wrapping, edge protection, steel straps, coil labels, shipping marks, loading photos and container loading support.
Common Questions from Galvalume Steel Coil Buyers
What information should I send for a galvalume steel coil quotation?
Send standard, grade, thickness, width, AZ coating, coil ID, coil weight, surface treatment, hardness, quantity, packing method, application and destination details.
What is the difference between galvanized coil and galvalume coil?
Galvanized coil uses zinc coating. Galvalume coil uses aluminum-zinc alloy coating, commonly used for roofing, cladding and outdoor building materials. Final selection should follow application, environment and project specification.
Can galvalume coil be used for roofing sheet production?
Yes. Galvalume coil is widely used for corrugated roofing sheet, trapezoidal roofing sheet, wall cladding and roll forming. Buyers should confirm thickness, width, AZ coating, hardness and profile forming requirement.
Can you provide anti-fingerprint galvalume coil?
Anti-fingerprint surface can be discussed according to product type, coating, thickness, application, quantity and availability. This requirement should be stated clearly at the inquiry stage.
Can you provide MTC, packing list and loading photos?
Yes. MTC, packing list, commercial invoice, certificate of origin, inspection documents, coil packing photos and loading photos can be discussed according to order requirements.
Related Galvalume, Coil and Coated Steel Pages
Galvalume steel coil buyers may also need galvalume sheet, PPGL coil, galvanized coil, steel coil category information, roofing sheet, quality control and packing support.
Send Your Galvalume Steel Coil Inquiry
Send galvalume coil standard, grade, thickness, width, AZ coating, surface treatment, coil ID, coil weight, hardness, quantity, packing request and destination details. We will check availability, coating requirement, documents, packing method and quotation details.
Direct Contact
For Faster Quotation, Please Include
- ✓Standard and grade: ASTM A792, JIS G3321, EN 10346, DX51D+AZ, SGLCC or required grade.
- ✓Size: thickness, width, coil ID 508mm / 610mm, coil weight and quantity.
- ✓AZ coating, surface treatment, AFP requirement, hardness and application.
- ✓Packing method, MTC, inspection, destination country or port and shipment schedule.
Document Support
- MTC
- Heat number
- Packing list
- Commercial invoice
- Certificate of origin
- Inspection report
- Loading photos
- Shipping marks
Steel Inquiry Form
Use this form for galvalume steel coil, aluzinc steel coil, AZ coated steel coil, AZ150 coil, anti-fingerprint galvalume coil, full hard galvalume coil, slit galvalume coil and other steel product inquiries.
