Stainless Steel Plate Supplier
Bao Steel supplies stainless steel plate for equipment fabrication, tanks, machinery parts, kitchen equipment, architectural panels, marine-related components, chemical equipment and corrosion-resistant industrial applications. You can send your grade, thickness, width, length, surface finish, hot rolled or cold rolled process, cutting request, MTC requirement, packing method and destination so we can check availability, processing feasibility and export quotation details.
Choose the Stainless Steel Plate Route for Your Order
Stainless steel plate quotation should start from the actual grade, thickness, surface finish and application environment. 304 / 304L is the common route for general corrosion-resistant use, 316 / 316L is used for stronger corrosion resistance, and 2205 duplex stainless steel plate should be reviewed when higher strength and more demanding chloride-related service conditions are required.
304 / 304L Stainless Steel Plate
Use this route for general corrosion resistance, fabrication, equipment panels, tanks, kitchen equipment and broad industrial use.
View 304 / 304L Plate →316 / 316L Stainless Steel Plate
Use this route for marine, coastal, chemical and chloride-related environments where stronger corrosion resistance is needed.
View 316 / 316L Plate →2205 Duplex Stainless Steel Plate
Review this route when the project requires duplex stainless strength and corrosion resistance beyond common 304 or 316 routes.
View 2205 Plate →Hot Rolled Stainless Steel Plate
For thicker stainless plate, industrial fabrication, tanks, equipment bases, cutting and project plate supply.
View Hot Rolled Route →Cold Rolled Stainless Steel Plate
For smoother surface, cleaner appearance, equipment panels, visible parts and thinner plate applications.
View Cold Rolled Route →Surface Finish Plate
For NO.1, 2B, 2D, BA, NO.4, NO.8, 8K, mirror, hairline, sand blast and brush finish requirements.
View Surface Options →Stainless Steel Chequered Plate
For anti-slip flooring, steps, platforms, walkways, equipment areas and industrial working surfaces.
View Chequered Plate →Cut-to-Size Plate
For custom dimensions, project cutting, edge protection, protective film, labels and export packing.
View Cutting Support →Stainless Plate Quotation Depends on Grade, Thickness, Surface and Final Use
A stainless steel plate inquiry should not only mention “stainless plate.” The correct quotation depends on whether the order needs general corrosion resistance, marine or chemical service, duplex strength, decorative surface, thick plate cutting, cold rolled surface, protective film, MTC and export packing.
Grade Selection
Confirm 304 / 304L, 316 / 316L, 2205, 201, 430, 321, 310S, 904L or project-specified grade before quotation.
Plate Thickness
4–100mm thickness should be checked by grade, stock availability, hot rolled or cold rolled process and cutting requirement.
Surface Finish
NO.1, 2B, 2D, BA, NO.4, NO.8, 8K, mirror, chequered, hairline, sand blast and brush should be confirmed by feasibility.
Export Readiness
Confirm MTC, heat number, marking, protective film, wooden pallet, waterproof paper, shipping marks and loading photos.
Common Stainless Steel Plate Grades and Purchase Routes
The grade route should match the final application. If the buyer is comparing 304, 316 and 2205, the corrosion environment and project document should be confirmed before final quotation.
| Grade Route | Common Use | Buyer Should Confirm | Page / Inquiry Route |
|---|---|---|---|
| 304 / 304L Stainless Steel Plate | General corrosion-resistant fabrication, equipment panels, tanks, kitchen equipment, architectural parts and broad industrial use. | Confirm whether 304 is acceptable or 304L is required for welding or low-carbon project documents. | View 304 / 304L Plate → |
| 316 / 316L Stainless Steel Plate | Marine-related parts, coastal fabrication, chemical equipment, welded stainless parts and stronger corrosion resistance needs. | Confirm chloride exposure, chemical environment and whether 316L must be shown on the MTC. | View 316 / 316L Plate → |
| 2205 Duplex Stainless Steel Plate | Marine structures, offshore parts, chemical equipment, desalination systems and high-corrosion industrial use. | Confirm whether the project requires 2205, UNS S32205, UNS S31803, EN 1.4462 or equivalent route. | View 2205 Plate → |
| 201 / 430 Stainless Steel Plate | Cost-sensitive decoration, appliance panels, selected indoor applications and light fabrication. | Confirm final environment before replacing 304 or 316 with lower-cost grades. | Send Grade Requirement → |
| 321 / 310S Stainless Steel Plate | Special industrial environments involving elevated temperature or heat-resistant stainless requirements. | Confirm grade, standard, size, temperature condition, document requirement and availability. | Send Project Requirement → |
| 904L / Special Stainless Steel Plate | More demanding corrosion-resistant applications subject to project specification and supply feasibility. | Confirm actual grade, standard, specification, quantity, inspection document and delivery schedule. | Request Availability Check → |
Stainless Steel Plate Specification Range
Send complete specifications before quotation. Thickness, width, length, grade, surface finish and process route directly affect price, availability, packing method and delivery time.
Core Supply Range
- ProductStainless steel plate, hot rolled stainless plate, cold rolled stainless plate, chequered plate and cut-to-size stainless plate
- Grades304 / 304L, 316 / 316L, 2205, 201, 430, 321, 310S, 904L and project-specified stainless grades
- Thickness4–100mm, subject to grade, process, stock availability and cutting requirement confirmation
- Width1000–3500mm, with actual width confirmed by stock size or production route
- Length2000–6000mm, with cut-to-size support according to project requirement
- ProcessHot rolled and cold rolled routes, depending on thickness, surface finish and final use
Surface, Processing and Export Details
- Surface Finish2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, hairline, sand blast and brush by feasibility review
- ProcessingCutting, shearing, surface protection, protective film, edge treatment, packing and marking support
- InspectionThickness check, width and length check, surface inspection, grade verification, marking check and MTC review
- DocumentsMTC, heat number, packing list, commercial invoice, certificate of origin and third-party inspection support by request
- PackingWaterproof paper, protective film, wooden pallet, steel strip, edge protection, labels and shipping marks
- Application CheckEquipment, tank, kitchen equipment, marine use, chemical environment, decoration, fabrication or distribution
Stainless Steel Plate Surface Finish Selection
Surface finish affects appearance, downstream processing, scratch control, protective film, packing and final application. Do not confirm surface only by name; confirm grade, thickness, process and end use together.
| Surface Finish | Typical Use | Quotation Check Point |
|---|---|---|
| NO.1 | Hot rolled, annealed and pickled industrial surface, common for thicker stainless steel plate. | Confirm grade, thickness, surface acceptance, cutting requirement and packing method. |
| 2B / 2D / BA | Cold rolled stainless plate or sheet route for smoother surfaces and cleaner appearance. | Confirm thickness feasibility, protective film, surface requirement and application. |
| NO.4 / Hairline / Brush | Decorative surfaces, visible panels, equipment covers, architectural panels and interior stainless work. | Confirm brushing direction, film protection, scratch control and packing requirement. |
| NO.8 / 8K / Mirror | Polished decorative panels, elevator panels, interior wall panels and visible stainless parts. | Confirm polishing grade, film protection, size feasibility and handling requirement. |
| Chequered Plate | Anti-slip flooring, platforms, steps, walkways and industrial working surfaces. | Confirm pattern, thickness, grade, size, loading requirement and application environment. |
| Sand Blast | Matte or texture-controlled stainless surface for selected decorative or industrial applications. | Confirm surface sample, grade, thickness, texture requirement and packing protection. |
Stock, Thickness Check, Surface Inspection, MTC and Export Packing
Before you confirm the order, you can review stainless plate stock, grade labels, surface condition, thickness measurement, MTC matching, cut-to-size processing, protective packing and loading preparation.
Stainless Steel Plate Stock
You can confirm grade, stock size, plate thickness, surface condition and availability before quotation.
Thickness and Size Check
You can check thickness, width, length, tolerance and order consistency before cutting or shipment.
Surface Inspection
You can review surface finish, scratch control, protective film and visible panel requirements before dispatch.
Cut-to-Size Processing
You can request custom size, cut plate, edge protection, project packing and drawing-based dimensions.
Marking and MTC Check
You can review grade, heat number, plate marking, MTC matching and inspection documents before shipment.
Export Packing
You can confirm waterproof paper, wooden pallet, steel strips, labels, edge protection and shipping marks.
Common Applications of Stainless Steel Plate
Stainless steel plate should be selected according to corrosion environment, strength requirement, surface finish, hygiene requirement, appearance, processing method and final service condition.
Industrial Equipment and Tanks
For tanks, vessels, equipment panels, machinery covers, welded components and industrial fabrication.
Food and Kitchen Equipment
For kitchen equipment, worktops, cabinets, trays, covers and selected food-related processing systems.
Decoration and Architecture
For wall panels, elevator panels, cladding, decorative surfaces and visible stainless steel components.
Marine and Chemical Use
For coastal, marine-related, chemical and corrosion-resistant applications when the suitable grade is confirmed.
Grade Selection, Surface Protection, MTC and Export Packing Support
Stainless steel plate buyers often need to confirm not only grade and price, but also surface condition, protective film, cutting route, MTC, heat number, packing method and loading condition.
Grade Route Review
You can compare 304 / 304L, 316 / 316L, 2205, 201, 430, 321, 310S and other grades by final use.
Surface Finish Check
You can confirm NO.1, 2B, BA, NO.4, NO.8, 8K, mirror, hairline, brush, sand blast or chequered finish.
Cutting and Size Support
You can send thickness, width, length, tolerance, cut-to-size requirement and project drawing for quotation.
Export Packing
You can confirm protective film, waterproof paper, wooden pallet, steel strips, edge protection and loading photos.
Common Questions from Stainless Steel Plate Buyers
What information should I send for a stainless steel plate quotation?
Send grade, standard, thickness, width, length, surface finish, hot rolled or cold rolled requirement, quantity, cutting request, protective film requirement, MTC requirement, packing method and destination details.
How do I choose 304, 316 or 2205 stainless steel plate?
304 / 304L is commonly used for general corrosion-resistant applications. 316 / 316L is selected when stronger corrosion resistance is needed, especially in marine, coastal, chloride-related or chemical environments. 2205 duplex stainless steel plate should be reviewed when the project requires higher strength and more demanding corrosion resistance.
Can 4–100mm stainless steel plate be supplied with all surface finishes?
No. Surface feasibility depends on grade, thickness, rolling process and processing route. Thick stainless plate is commonly supplied with NO.1 hot rolled pickled surface, while 2B, BA, 8K, mirror, hairline and brush finishes should be confirmed by actual thickness and processing feasibility.
Can you provide cut-to-size stainless steel plate?
Cut-to-size support can be reviewed according to grade, thickness, width, length, tolerance, quantity, edge requirement and packing method.
Can you provide MTC and export packing photos?
MTC, heat number, plate marking, packing list, commercial invoice, certificate of origin, packing photos and loading photos can be discussed according to order requirements.
Related Stainless Steel Plate and Export Support Pages
You can review related grade pages, stainless steel coil, steel plate category and export support pages before sending your inquiry.
Send Your Stainless Steel Plate Inquiry
Send grade, thickness, width, length, surface finish, hot rolled or cold rolled requirement, cutting request, quantity, MTC requirement, packing method and destination details. We will check stock, processing feasibility, surface availability, export packing and quotation details.
Direct Contact
For Faster Quotation, Please Include
- ✓Grade: 304, 304L, 316, 316L, 2205, 201, 430, 321, 310S, 904L or project grade.
- ✓Thickness, width, length, tolerance and cut-to-size requirement.
- ✓Surface finish: NO.1, 2B, BA, mirror, 8K, hairline, brush, chequered or other finish.
- ✓Quantity, MTC requirement, packing request, destination port and delivery schedule.
Document Support
- MTC
- Heat Number
- Plate Marking
- Inspection Record
- Packing List
- Commercial Invoice
- Loading Photos
- Shipping Marks
Steel Inquiry Form
Use this form for stainless steel plate, 304 / 304L stainless plate, 316 / 316L stainless plate, 2205 duplex stainless plate, hot rolled stainless plate, cold rolled stainless plate and cut-to-size stainless steel plate inquiries.
