Stainless Steel Coil Supplier
Bao Steel (Qingdao) Co., Ltd. supplies stainless steel coil for service centers, pipe mills, kitchen equipment manufacturers, appliance factories, decoration projects, tank fabrication, industrial components and stainless processing plants. Available range includes overall thickness 0.1–16mm, hot rolled thickness 3.0–16mm, cold rolled thickness 0.1–6.0mm, width 12.7–1500mm, coil ID 508mm / 610mm, with surface finishes including NO.1, BA, 2B, NO.4, 8K and HL.
Choose the Stainless Steel Coil Grade or Surface You Need
Stainless steel coil quotation should start from grade, standard, surface finish, hot rolled or cold rolled condition and final application. You can choose from common stainless coil options such as 304, 304L, 316, 316L, 201, 430, 2B, BA, NO.4, HL and 8K, then confirm thickness, width, coil ID, coil weight, slitting requirement, protective film and packing method.
304 / 304L Stainless Steel Coil
Common stainless steel coil for kitchen equipment, tanks, panels, welded pipe, appliance parts, fabrication and general corrosion-resistant applications.
- 304 is used for general corrosion-resistant stainless applications
- 304L is selected when lower carbon content is required for welding
- Available in hot rolled, cold rolled, slit coil and finished surface supply
316 / 316L Stainless Steel Coil
Stainless steel coil for stronger corrosion resistance, chemical equipment, marine-related components, tanks, industrial parts and welded fabrication.
- 316 is selected where better corrosion resistance is required
- 316L is often used when welding and low-carbon requirements matter
- Surface finish and MTC requirement should be confirmed before quotation
201 Stainless Steel Coil
Cost-sensitive stainless coil for indoor decoration, light fabrication, appliance parts, trims, panels and selected non-critical applications.
- Often selected when cost control is more important than high corrosion resistance
- Suitable for indoor decoration and selected light fabrication uses
- Final environment should be confirmed before replacing 304 or 316
430 Stainless Steel Coil
Ferritic stainless steel coil for appliances, decoration panels, kitchen equipment parts, indoor products and selected formed components.
- Commonly used for appliance panels, decorative sheets and indoor applications
- Can be supplied with 2B, BA, NO.4, HL or buyer-specified finish
- Surface protection and packing should be confirmed for visible parts
2B / BA Cold Rolled Stainless Coil
Cold rolled stainless steel coil for appliances, panels, kitchen equipment, visible components, light fabrication and precision processing.
- 2B is widely used for general stainless processing and panels
- BA is selected when a brighter and cleaner surface is required
- Protective film should be discussed for appearance-sensitive products
NO.4 / HL / 8K Decorative Stainless Coil
Decorative stainless steel coil for elevator panels, wall panels, appliance surfaces, architectural decoration and visible stainless parts.
- Used where surface appearance is part of the final product value
- Finish direction, surface protection and packing should be confirmed
- Samples or finish photos are recommended before repeat order confirmation
Stainless Steel Coil Stock, Surface Finish, Slitting, Inspection and Export Packing
You can review stainless coil stock, surface finish condition, slitting capability, protective film, quality inspection and export packing before placing an order. These factory scenes help confirm whether the coil supply route matches your processing, resale or project delivery requirements.
Stainless Steel Coil Warehouse Stock
Show stainless coil stock, visible coil labels, indoor storage, lifting area or export-ready stainless inventory.
Surface Finish Display
Show 2B, BA, NO.4, HL, 8K, mirror finish, brushed surface or protective film surface close-up.
Stainless Coil Slitting Line
Show slitting equipment, narrow stainless strip output, coil rewinding or processing-ready strip coils.
Protective Film and Surface Protection
Show film-covered stainless coil, protected brushed surface, mirror surface protection or handling-ready packing.
Coil Quality and Document Check
Show thickness check, width check, surface inspection, coil label checking or MTC document review.
Export Coil Packing
Show waterproof wrapping, edge protection, wooden pallet, steel straps, coil labels and loading preparation.
Stainless Steel Coil Supply Routes We Commonly Handle
Different buyers need different stainless steel coil routes according to thickness, finish, processing method and final application. You can confirm whether you need hot rolled coil, cold rolled coil, slit coil, pipe-making coil, decorative coil or industrial fabrication coil before quotation.
Hot Rolled Stainless Coil
Thickness 3.0–16mm, commonly supplied with NO.1 finish for tanks, equipment, industrial parts and heavier processing.
Cold Rolled Stainless Coil
Thickness 0.1–6.0mm for appliances, decoration, kitchen equipment, panels, precision processing and light fabrication.
Slit Stainless Steel Coil
Width 12.7–1500mm depending on parent coil, grade, thickness, slitting tolerance and strip coil packing requirement.
Stainless Coil for Pipe Making
Used for welded stainless pipe, decorative tube, industrial tube and pipe mill processing where width and edge condition matter.
What Buyers Should Confirm Before Stainless Steel Coil Quotation
Stainless steel coil quotation should clearly confirm grade, standard, hot rolled or cold rolled condition, thickness, width, surface finish, coil ID, coil weight, slitting requirement, protective film, packing method and shipment destination.
Supply Range
- Overall Thickness0.1–16mm, subject to grade, surface finish and order requirements
- Hot Rolled Thickness3.0–16mm, commonly supplied with NO.1 surface finish
- Cold Rolled Thickness0.1–6.0mm, available with 2B, BA, NO.4, 8K, HL and related finishes
- Width12.7–1500mm, including full-width coil and slit stainless strip requirements
- Coil ID508mm / 610mm according to buyer’s decoiling, slitting or processing equipment
- Surface FinishNO.1, BA, 2B, NO.4, 8K, HL and protective film options can be discussed
Quotation Details Buyers Should Provide
- Grade201, 304, 304L, 316, 316L, 321, 310S, 430, 2205 or buyer-specified grade
- StandardASTM, AISI, JIS, EN, GB or project-specified standard
- SizeThickness, width, coil ID, coil weight, tolerance and slitting requirement
- SurfaceNO.1, 2B, BA, NO.4, 8K, HL, mirror, brushed or protective film requirement
- QuantityTotal tonnage, number of coils, coil weight, container quantity or project schedule
- DestinationDestination country or port, trade term, packing requirement and shipment schedule
Stainless Steel Coil Surface Finish Options
Surface finish directly affects application, processing, appearance and packing method. For visible stainless products, surface finish, film protection and packing method should be confirmed before order.
NO.1
Hot rolled, annealed and pickled finish, commonly used for industrial stainless coil and heavy processing.
2B
Common cold rolled surface used for general stainless processing, appliances, panels and fabrication.
BA
Bright annealed surface for applications requiring cleaner and brighter appearance.
NO.4 / HL
Brushed or hairline finish for decorative panels, appliances, elevator panels and visible stainless parts.
8K / Mirror
Highly reflective surface for decorative applications. Protective film and careful packing should be confirmed.
Protective Film
Film protection can be discussed for polished, brushed, mirror or appearance-sensitive stainless coil.
Slit Edge
Slitting tolerance, burr requirement and edge condition should be confirmed for strip or precision parts.
Surface Inspection
Surface check, packing check, photos and third-party inspection can be arranged according to order requirements.
Common Stainless Steel Coil Grades
Stainless steel grade should be selected according to corrosion environment, forming requirement, welding condition, appearance requirement and target price.
304 / 304L
General corrosion-resistant stainless coil for kitchen equipment, tanks, panels, tubing and fabrication.
316 / 316L
Selected for stronger corrosion resistance, chemical environments and marine-related applications.
201
Often used for cost-sensitive decorative, indoor and selected light fabrication applications.
430
Commonly used for appliances, decoration, panels and selected indoor stainless applications.
Common Applications of Stainless Steel Coil
Stainless steel coil is commonly used when buyers need corrosion resistance, surface appearance, forming performance and stable processing quality.
Stainless Pipe & Tube Making
For welded stainless pipe, decorative tube, industrial tube and downstream pipe manufacturing.
Kitchen & Food Equipment
For kitchen equipment, worktops, cabinets, trays, panels and selected food-related equipment.
Appliance & Decoration
For appliance panels, elevator panels, decorative sheets, wall panels and visible stainless components.
Industrial Fabrication
For tanks, machinery covers, equipment parts, enclosures, chemical equipment and fabricated components.
Surface Finish, Slitting, MTC and Export Packing Support
Stainless steel coil buyers usually need to confirm grade, finish, protective film, coil ID, coil weight, slitting requirement, packing method and documents before final order.
Grade & Finish Check
Review grade, hot rolled or cold rolled condition, surface finish and application before quotation.
Slitting Support
Slit width, tolerance, burr requirement, coil weight and stainless strip packing can be discussed by order.
Quality Documents
MTC, heat number, packing list, commercial invoice, certificate of origin and inspection support available.
Export Packing
Coil wrapping, edge protection, wooden pallet, steel straps, coil labels, shipping marks and loading photos.
Common Questions from Stainless Steel Coil Buyers
What stainless steel coil sizes can you supply?
Our stainless steel coil supply range includes overall thickness 0.1–16mm, hot rolled thickness 3.0–16mm, cold rolled thickness 0.1–6.0mm, width 12.7–1500mm and coil ID 508mm / 610mm, subject to grade, surface finish and order requirements.
What is the difference between hot rolled and cold rolled stainless steel coil?
Hot rolled stainless steel coil is generally thicker and commonly supplied with NO.1 finish for industrial use. Cold rolled stainless steel coil is thinner and can be supplied with 2B, BA, NO.4, 8K, HL and other surface finishes for decoration, appliances and precision processing.
Can you provide 2B, BA, NO.4, 8K and HL surface finishes?
Yes. Surface finish options include NO.1, BA, 2B, NO.4, 8K and HL. Protective film and surface protection should be confirmed when the surface is appearance-sensitive.
Can you provide slit stainless steel coil?
Yes. Slitting can be discussed according to required width, thickness, tolerance, grade, surface finish, burr requirement, coil weight and packing method.
Can you provide MTC, packing list and loading photos?
Yes. MTC, packing list, commercial invoice, certificate of origin, inspection documents, coil packing photos and loading photos can be discussed according to order requirements.
Related Stainless Steel and Coil Pages
Stainless steel coil buyers may also need stainless steel plate, steel coil category information, stainless pipe, quality control and export packing support.
Send Your Stainless Steel Coil Inquiry
Send stainless steel grade, hot rolled or cold rolled condition, thickness, width, surface finish, coil ID, coil weight, slitting requirement, quantity, packing request and destination details. We will check availability, surface requirement, documents, packing method and quotation details.
Direct Contact
For Faster Quotation, Please Include
- ✓Grade: 201, 304, 304L, 316, 316L, 430, 2205 or buyer-specified stainless steel grade.
- ✓Size: thickness, width, coil ID 508mm / 610mm, coil weight and slitting requirement.
- ✓Condition and surface: hot rolled, cold rolled, NO.1, BA, 2B, NO.4, 8K, HL or protective film.
- ✓Quantity, packing method, MTC, inspection, destination country or port and shipment schedule.
Document Support
- MTC
- Heat number
- Packing list
- Commercial invoice
- Certificate of origin
- Inspection report
- Loading photos
- Shipping marks
Steel Inquiry Form
Use this form for stainless steel coil, 304 stainless coil, 316 stainless coil, 201 stainless coil, 430 stainless coil, 2B stainless coil, BA stainless coil, NO.1 stainless coil, decorative stainless coil and slit stainless coil inquiries.
