Non-Ferrous Metals Supplier
Bao Steel (Qingdao) Co., Ltd. supplies non-ferrous metal products for importers, distributors, fabrication plants, electrical equipment buyers, building material suppliers and industrial manufacturers. Our non-ferrous product range focuses on aluminum sheet / plate and aluminum coil, copper sheet / plate and copper coil, including pure copper / red copper and brass materials with export packing, inspection documents and shipment support.
Aluminum, Copper and Brass Stock Display for Export Buyers
Non-ferrous metal buyers usually care about alloy, temper, thickness, width, surface condition, flatness, conductivity, corrosion resistance, packing protection and document traceability. Product photos should show real stock, coil condition, sheet surface, labels, packing and loading readiness.
Aluminum Sheet / Plate Stock
Show aluminum sheets or plates, surface condition, flatness, protective film and warehouse stock.
Aluminum Coil Stock
Show aluminum coils, coil ID, packaging, surface protection and export-ready coil handling.
Copper Sheet / Plate
Show red copper / pure copper sheet or plate, surface finish, thickness and batch labels.
Copper Coil
Show copper coils or strips for electrical, industrial, stamping and processing applications.
Brass Sheet / Coil
Show brass sheet, brass strip or brass coil for decoration, hardware, stamping and industrial parts.
Export Packing
Show wooden pallets, waterproof wrapping, protective film, edge protection, labels and loading photos.
Two Core Non-Ferrous Product Pages
To keep the website structure clean and procurement logic clear, aluminum sheet / plate and aluminum coil should be handled together. Copper sheet / plate and copper coil should also be handled together, with copper content covering both pure / red copper and brass materials.
Aluminum Sheet, Plate & Coil
One page for aluminum sheet, aluminum plate and aluminum coil. This structure fits real buyer searches because many aluminum buyers compare flat sheet, plate and coil supply together before deciding cut-to-size, roll material or processing route.
- Common alloy options: 1050, 1060, 1100, 3003, 5052, 5083, 6061, 6063, 7075 and buyer-specified alloys
- Common tempers: O, H12, H14, H24, H32, T4, T6 and project-specified temper
- Surface options: mill finish, brushed, anodized, coated, embossed, checkered or protective film
- Used for construction, roofing, curtain wall, signboard, machinery, transportation and industrial parts
Copper Sheet, Plate & Coil
One page for copper sheet, copper plate and copper coil. This page should include pure / red copper and brass, because many buyers search by copper material type, application, conductivity, stamping performance or decorative use.
- Pure / red copper options: T1, T2, C11000, C10200 and buyer-specified conductive copper grades
- Brass options: H62, H65, H68, C26000, C26800 and buyer-specified brass grades
- Product forms: copper sheet, copper plate, copper strip, copper coil, brass sheet, brass strip and brass coil
- Used for electrical parts, busbars, terminals, heat exchangers, decoration, hardware and stamped components
Non-Ferrous Metal Products We Supply
This total page is used to guide buyers into the correct product route. Final quotation should be based on alloy, temper, thickness, width, length, surface condition, packing method, quantity and destination.
Aluminum Sheet / Plate
Aluminum sheet and plate are used for building materials, machinery, vehicle parts, signage, decoration, industrial panels and processing projects.
- Common alloys include 1050, 1060, 1100, 3003, 5052, 5083, 6061 and 7075
- Thickness, width, length, alloy, temper and surface should be confirmed before quotation
- Surface can include mill finish, brushed, anodized, coated, embossed or checkered pattern
- Protective film, paper interleaving and pallet packing can be arranged by order
Aluminum Coil
Aluminum coil is used for roofing, ceiling, gutter, decoration, insulation, signs, appliance parts, packaging and downstream slitting or stamping.
- Alloy, temper, thickness, coil width, coil ID and coil weight should be confirmed
- Mill finish, color coated, embossed, anodized or buyer-specified surface can be discussed
- Suitable for distributors, coil processors, roofing buyers and industrial manufacturers
- Export packing should protect coil edges, surface and moisture-sensitive cargo condition
Pure / Red Copper Sheet & Coil
Pure copper and red copper sheet / coil are mainly selected for conductivity, thermal performance, formability and industrial processing.
- Common materials include T1, T2, C11000, C10200 and buyer-specified copper grades
- Used for busbars, terminals, electrical parts, heat exchangers, conductive parts and stamping
- Thickness, width, length, coil ID, hardness and conductivity requirement should be confirmed
- Surface protection and packing should prevent scratches, oxidation and moisture damage
Brass Sheet & Coil
Brass sheet and coil are selected for decorative appearance, machinability, stamping performance, corrosion resistance and hardware applications.
- Common materials include H62, H65, H68, C26000, C26800 and buyer-specified brass grades
- Used for hardware, decoration, terminals, instruments, fittings, stamped parts and industrial components
- Confirm copper-zinc grade, thickness, width, surface, hardness and final application
- Sheet, strip, coil, cut-to-size and protective packing can be discussed by order
How Buyers Usually Choose Aluminum, Copper and Brass
Non-ferrous metals are often selected by application rather than only by price. Aluminum buyers usually care about weight, corrosion resistance and formability. Copper buyers usually care about conductivity and thermal performance. Brass buyers usually care about machinability, color and stamping performance.
Aluminum
Used when buyers need lighter weight, corrosion resistance, easier forming, surface decoration or building material processing.
Pure / Red Copper
Used when electrical conductivity, thermal conductivity, busbar performance or industrial conductive parts are required.
Brass
Used when buyers need good machinability, decorative yellow color, stamping performance and hardware component production.
Custom Non-Ferrous Supply
Other non-ferrous requirements can be reviewed by alloy, size, surface, temper, application and quantity.
What Buyers Should Confirm Before Non-Ferrous Metal Quotation
Non-ferrous metal pricing is sensitive to alloy, temper, size, surface, packing and metal price fluctuation. A clear RFQ can reduce repeated communication and avoid wrong material quotation.
For Aluminum Sheet, Plate and Coil
- Product FormAluminum sheet, aluminum plate, aluminum coil, strip or cut-to-size material
- Alloy1050, 1060, 1100, 3003, 5052, 5083, 6061, 6063, 7075 or buyer-specified alloy
- TemperO, H12, H14, H24, H32, T4, T6 or project-specified temper
- SizeThickness, width, length, coil width, coil ID, coil weight or cut-to-size requirement
- SurfaceMill finish, brushed, anodized, color coated, embossed, checkered or protective film
- PackingProtective film, paper interleaving, wooden pallet, coil packing, edge protection and loading photos
For Copper and Brass Sheet, Plate and Coil
- Product FormCopper sheet, copper plate, copper strip, copper coil, brass sheet, brass strip or brass coil
- Copper GradesT1, T2, C11000, C10200, C10100 or buyer-specified pure / red copper grade
- Brass GradesH62, H65, H68, C26000, C26800 or buyer-specified brass grade
- SizeThickness, width, length, strip width, coil ID, coil weight or cut-to-size requirement
- PerformanceConductivity, hardness, surface finish, bendability, stamping performance or decorative requirement
- PackingAnti-scratch protection, anti-oxidation packing, paper interleaving, wooden pallet and moisture protection
Common Aluminum, Copper and Brass Grades
Grade selection should follow final use. Aluminum for roofing and decoration is different from aluminum for machining. Copper for busbars is different from brass for stamping or decorative hardware.
Aluminum 1000 Series
1050, 1060 and 1100 are commonly used where formability, corrosion resistance and general aluminum sheet / coil supply are required.
Aluminum 3000 / 5000 Series
3003, 5052 and 5083 are common options for building materials, marine-related parts, tanks, panels and processing applications.
Aluminum 6000 / 7000 Series
6061, 6063 and 7075 are usually selected when buyers need strength, machining, structural use or higher-performance aluminum materials.
Copper and Brass
T2, C11000 and C10200 are common copper options; H62, H65, H68 and C26000 are common brass options for stamping and hardware.
Surface Inspection, Thickness Checking and Export Packing
For non-ferrous metal orders, buyers usually check alloy, temper, thickness, surface finish, scratches, oxidation, flatness, coil condition, packing protection and loading photos before shipment.
Aluminum Surface Checking
Show aluminum sheet surface, protective film, flatness, scratches and sheet condition inspection.
Copper Thickness Checking
Show thickness measurement, surface inspection, copper sheet condition and batch verification.
Coil Packing and Loading
Show coil packing, wooden pallet, waterproof wrapping, edge protection and container loading.
Common Applications of Aluminum, Copper and Brass Products
Non-ferrous materials are widely used in building systems, electrical equipment, heat transfer, machinery, transportation, decoration, hardware and industrial components.
Building and Decoration
Aluminum sheet, aluminum coil, brass sheet and decorative metal materials for roofing, panels, ceiling, signage and facades.
Electrical and Conductive Parts
Copper sheet, copper plate and copper strip for busbars, terminals, connectors, conductive parts and electrical equipment.
Industrial Processing
Aluminum, copper and brass materials for stamping, cutting, bending, machining, forming and component manufacturing.
Heat Exchange and Machinery
Copper and aluminum materials for heat exchangers, cooling systems, machinery parts, tanks and equipment components.
Building, Electrical and Industrial Use Cases
Use application photos to help buyers connect aluminum, copper and brass supply with real procurement needs such as building panels, electrical parts, industrial components and decorative metal products.
Aluminum Building Materials
Show aluminum sheet or coil used for roofing, panels, ceiling, signage or building decoration.
Copper Electrical Parts
Show copper sheet, plate or strip used for busbars, terminals, connectors or conductive parts.
Brass Hardware and Industrial Parts
Show brass sheet or coil used for stamped parts, decorative hardware, instruments or fittings.
Alloy Review, Size Confirmation, Surface Protection and Export Support
We help buyers confirm whether the selected non-ferrous material matches the final application, alloy requirement, temper, surface condition, processing route, packing method and import document requirement.
Alloy and Temper Review
Review aluminum alloy / temper, copper grade, brass grade and application requirements before quotation.
Size and Surface Confirmation
Confirm thickness, width, length, coil ID, coil weight, surface finish, protective film and tolerance requirement.
Inspection Documents
Support MTC, material verification, thickness check, surface inspection, packing list and certificate of origin.
Export Packing
Wooden pallet, coil packing, waterproof wrapping, paper interleaving, edge protection, labels and loading photos.
Common Questions from Non-Ferrous Metal Buyers
What non-ferrous metal products do you supply?
We mainly supply aluminum sheet / plate and aluminum coil, copper sheet / plate and copper coil, including pure / red copper and brass sheet / coil products.
Will aluminum sheet and aluminum coil be on the same product page?
Yes. Aluminum sheet, aluminum plate and aluminum coil should be handled together on one page because buyers often compare sheet, plate and coil supply before deciding the processing route.
Will copper sheet and copper coil be on the same product page?
Yes. Copper sheet, copper plate and copper coil should be handled together on one page. The copper page should also include pure / red copper and brass product options.
What information should I send for aluminum quotation?
Send alloy, temper, product form, thickness, width, length or coil details, surface finish, quantity, packing requirement and destination country or port.
What information should I send for copper or brass quotation?
Send copper or brass grade, product form, thickness, width, length or coil size, hardness, surface requirement, conductivity requirement if needed, quantity and destination details.
Can you provide MTC and export packing?
Yes. MTC, material verification, packing list, certificate of origin, inspection photos, loading photos and export packing support can be discussed according to order requirements.
Related Steel and Non-Ferrous Product Pages
Non-ferrous metal buyers may also need stainless steel plate, stainless steel coil, galvanized sheet, steel plate, quality control and export packing support.
Send Your Non-Ferrous Metals Inquiry
Send product form, alloy / grade, temper, thickness, width, length, coil size, surface finish, quantity, packing requirement and destination details. We will check material availability, documents, packing and quotation details.
Direct Contact
For Faster Quotation, Please Include
- ✓Product: aluminum sheet / plate / coil, copper sheet / plate / coil, brass sheet / coil or custom material.
- ✓Alloy / grade, temper or hardness, thickness, width, length, coil ID and coil weight if applicable.
- ✓Surface finish, protective film, paper interleaving, edge protection and packing method.
- ✓Application, quantity, destination country or port, trade term and document requirements.
Document Support
- MTC
- Material verification
- Thickness check
- Surface inspection
- Packing list
- Certificate of origin
- Inspection photos
- Loading photos
Steel Inquiry Form
Use this form for aluminum sheet, aluminum coil, copper sheet, copper coil, brass sheet, brass coil and other non-ferrous or steel product inquiries.